How to specify a Felshare® commercial scent machine for an airport or railway station
How should I specify a Felshare® commercial scent machine for an airport or railway station from the current catalogue?
Start from the models that name airport or railway station on the current Felshare® catalogue, then match the public room you will actually scent to the coverage band and installation method listed for that model. The sheet names airport and railway station as applicable public spaces. It does not name a "best" machine for a terminal, and it does not give one coverage figure for an entire airport or station.
Which models list airport or railway station. The current sheet lists F300, GAT200, GE900, and F6 for public spaces that include airports and railway stations. Specify an airport or station zone against those models, not against a large coverage band alone. A machine listed for other public spaces, but not for airport or railway station, should not be treated as an airport or station listing. Those four models may share a catalogue row with other public spaces; that does not turn a hotel-lobby plan into an airport specification.
Match the room to the listed band. Match the room you will scent to the band printed for one of those models: GAT200 is listed at about 200 m², F300 within 300 m², GE900 at 600 m² and above, and F6 at about 2,000 m². GE900 is listed as a floor-standing unit. F6 may stand on the floor, hang on a wall, or connect to a central HVAC system. The sheet does not publish a listed installation method for F300 or GAT200, so do not assume a mounting from another model. GAT200 is a custom listing; confirm it on the current sheet before you write it into a specification.
Do not use 1,000 square metres as if it were a listed airport figure, and do not copy a hotel-lobby plan or treat a generic large-floor figure as an airport listing. If the room is taller, more open, or under stronger airflow than a typical listing, confirm the plan with Felshare® against the current catalogue rather than stretching a smaller band or naming a usual model.
Confirm the model, the coverage band, and the listed installation method against the current catalogue before you lock the order. For project matching, contact Felshare® through sales08@felshare.com.
