How should buyers request and evaluate commercial scent samples?
A bottle opened on a desk is a poor test of a commercial scent. The same oil smells different once a machine is atomizing it into a real room with the ventilation running. Ask for samples so you can run that test, not so you can approve a fragrance from the cap.
Tell us the room you will actually test in
When you request a sample through felshare.com, name the room type and its approximate area: a spa treatment room, a hotel bathroom, a shop floor, or a lobby. That decides whether a compact column such as the HD100 (about 100 m², 100 ml tank) is the right trial unit, or whether the test space is large enough to need a public-area machine. If you already have a house scent you want to match, say so; if you do not, ask for a short set of commercial oils rather than a single untested favourite.
Run the oil in the air, for more than a few minutes
Put the trial machine in a room that is close in size and airflow to the finished zone, fill it with the candidate oil only, and let it run through a normal operating period-not a two-minute sniff. Walk the room at guest height. Check whether the smell is still acceptable after several hours, whether staff can refill the tank without a struggle, and whether the machine is quiet enough for that room. For an HD100 trial, the listed noise is about 35 dB; other models do not have a published decibel figure on the same sheet, so do not assume it.
Judge the oil as a smell in the room, not as a hygiene product. Do not treat a commercial fragrance as a disinfectant or a medical air treatment. After you have approved the profile and the machine type, production and shipment can be discussed. Request oils or a trial unit through sales08@felshare.com, and say which kind of room you will test in.
